peep site

[bonecollector853]

My peep site twists a little when i draw my bow back so i cant see through it properly. Any idea on how to fix it?

[Goose]

The right way would be to put it in a press and twist the string.
If your shooting a string loop, you can twist the loop on the string (hold the string and twist the loop) so that when you pull back it straightens out--your loop may be off to the side a little until you pull back but that doesn't hurt anything.

[msbadger]

Ya ...http://www.peepeliminator.com
[;)][:D]

[MoDeer]

I use the Ulta Nok to align my peep . Any time the peep comes out of alignment I loosen a few screws and twist the Ultra Nok around the string to realign my peep .

[fasteddie]

I had an Ultra nok and got rid of it . It made a noise . Tied on a string loop and can't get it to make my peep straight . I roll the string with my fingers while pulling it back and that helps for several shots . Since that works , I won't fix it until after bow season .

[Duder]

I agree with Goose. I'd first try to turn the D-loop. if that doesn't cut it, take it to a pro shop and they can adjust the string\peep placement on the bow press.

[tjmeyers]

Process of trial and error. Shifting strands from one side of the peep to the other until the peep aligns properly.

[Duder]

yeah, I think that is a good way to do it, too. My suggestion is easier if he doesn't have access to a bow press.

[smitty1hunter]

Have a pro shop align it and then have it served in so it doesn't move.

[EatDeer]

Put some whiteout on the peep then you will know if it moves....