- water fire exstinguisher.jpg (80.16 KiB) Viewed 4220 times
[attachment=0]both cleaned and polished, one cut to expose the same surface area..jpg[attachment=1]both cleaned and polished, one cut to expose the same surface area..jpg[attachment=2]both cleaned and polished, one cut to expose the same surface area..jpgkellory wrote:I intend for this to be a fair competition between the white gas, Coleman pump-up lantern and the modern propane lantern. Both lanterns are the same size, two mantles, and as similar as I could make them. I tried more than fifty brick and mortars for a second reflector for the pump-up lantern, but Coleman has stopped making them, and NO ONE knew where to get them anymore. So, I made a matched pair for this test. I believe they will be better for the purpose then the store bought anyways. Here are the finished reflectors, let me know if there is anything else I should do for set-up of a fair comparison test, or if I have missed anything. both lanterns have the same 5 1/2 inches from the cap down, so the reflective surfaces match.[attachment=0]water fire exstinguisher.jpg[attachment=2]water fire exstinguisher.jpg continued on next post.
motorbreaker wrote:You have a good idea kellory, But it seems the lamps may be a little bulkey. We wrap alum. foil
over the glass on one side of the lamps to reflect the light and it works very well and is easy to do.
Users browsing this forum: No registered users and 0 guests