If youxe2x80x99re a hunter, you likely have some type of animal hanging on your wall at home. Youxe2x80x99ve worked hard to harvest your trophy and now you want to have that memorable experience preserved for years to come. As Daniel E. Schmidt of Deer & Deer Hunting put it, xe2x80x9ctaxidermy displays are not xe2x80x98trophiesxe2x80x99 of accomplishment, but rather reverent reminders of blessed days afield for hunters.xe2x80x9d 

With all the time and money youxe2x80x99ve spent on your taxidermy mount, you want it to last a lifetime. However, there is more to owning a mount than simply hanging it on the wall and leaving it untouched. 

To better understand how to keep your trophy looking like it did the day you brought it home from the taxidermist, wexe2x80x99ve asked the top experts in the field to give their best tips, tricks and advice for keeping your trophy in tip-top shape. 

Where should I place my trophy mount?

UV rays can wreak havoc on your taxidermy. Ensure the trophy stays out of direct sunlight, as sunlight will cause it to fade and possibly crack. xe2x80x94 Warrick Ferrar, Taxidermy America

Avoid mounting trophies in locations where they might accidentally be bumped. Donxe2x80x99t place your taxidermy in areas with very high or very low humidity, or significant shifts in temperature and humidity xe2x80x94 such as a garage or screened-in porch. Also, as appealing as having a big mount over the fireplace may be, the heat that rises from a fireplace isnxe2x80x99t the best thing for a taxidermy mount. Use the fireplace sparingly and make sure there is adequate humidity in the room. xe2x80x94 Toby Asplin, SafariWorks Dxc3xa9cor 

How do I hang my mount?

Any mount created by a quality taxidermist to be hung on a wall should have a quality hanger on the back. Most shoulder mounts will hang from a single screw, toggle bolt, or lag screw xe2x80x94 depending on the weight of the mount.

Screws into wall studs are adequate for most smaller mounts. If the mount needs to hang between studs, utilize a toggle bolt rated for the weight of the trophy. Very large or heavy mounts, should be hung from a lag screw centered on a wall stud.

Alternatively, if the width of the mount is greater than 16 inches, a mounting plate affixed to two studs provides some flexibility in where the mount is placed between the studs. Be sure the mounting plate is made of wood that will support the weight of the trophy when hung from a lag screw. We recommend avoiding plywood, oriented strand board (OSB) or anything similar. xe2x80x94 Toby Asplin, SafariWorks Dxc3xa9cor

How do I properly clean my mount?

Your trophy requires regular care to survive in the long term. If your mount is in a controlled area xe2x80x94 free from moisture, heat and sunlight xe2x80x94 you can clean your mount about once a month. If your trophy is in a high dust area, clean it twice per month.

Mammal Care: Clean your prized taxidermy trophies with a soft cloth misted with 409xc2xae cleaner. Do not spray the 409xc2xae directly onto the mount itself. You do not want to saturate it, you need just enough to clean the dust off and have it stick to the cloth. Wipe with the lay of the hair xe2x80x94 never brush the hair or fur back.

Antler and Horn Care: For antlered and horned species, use the same process with the cleaner and simply wipe them down with a soft cloth.

Eye Care: With a cotton swab and just enough 409xc2xae or glass cleaner to dampen it (not dripping wet), you can lightly clean the eyes. Be careful not to touch any painted surfaces around the eye itself. xe2x80x94 D. Price, Outback Taxidermy

What do I do about pests?

Once or twice a year, place your trophy in a freezer for a few days to kill any unwanted pests who may be eating at the mount, which can result in fur slippage. For larger pieces or collections with a visible infestation, itxe2x80x99s recommended to bug bomb the entire room. xe2x80x94 Allis Markham, Prey Taxidermy

Are there any health risks from the chemicals used in taxidermy?

If you take your animal to a professional studio, there should be no worries about chemicals or preservatives that are used in taxidermy. Harsh chemicals are rarely used in the taxidermy process, and the chemicals that are used are not harmful after the process is complete. As with any product you buy, common sense should be used when displaying taxidermy mounts. Keeping mounts out of reach from children and pets is always a good practice. xe2x80x94 Aaron Stehling, Stehlingxe2x80x99s Taxidermy

If Ixe2x80x99m not displaying my taxidermy, where should I store it?

It is important to keep your mounts in a dark, dry area that is free from bugs. Moths are a big problem for haired mounts. They lay their eggs at the base of the hair and the larva eat where the hair is attached, causing hair loss. xe2x80x94 Shirley Hopkins, A Memory Saved Taxidermy 

Are there steps I can take during my hunt to facilitate a successful mounting?

How you transport your animal after a successful hunt is very important. Make sure not to drag the animal on the part that you plan on mounting, so you donxe2x80x99t cause damage to the hide from the friction between it and the ground. For example, if you wish to have a whitetail buck shoulder-mounted, dragging it from its antlers or front legs is better than dragging it from its back legs. xe2x80x94 Andrea Crider, Huntress View

We like to remind hunters that they donxe2x80x99t necessarily need to wait for a hog with big cutters. When the taxidermist mounts their hog, they use a fake (plastic) set of cutters. Most people donxe2x80x99t realize this and spend a lot of time looking for something with big cutters, when in reality, the real ones will not be used in the mount. xe2x80x94 Matt Wetzel, Hog Wild OK

With a regular cleaning regiment, keeping your trophies looking clean and fresh can be easy. xe2x80x9cRemembering that your mounted trophy is a preserved natural specimen is key,xe2x80x9d says Allis Markham of Prey Taxidermy. xe2x80x9cAlthough, the taxidermist has done most of the preservation work beforehand, the rest is up to the owner of the trophy mount.xe2x80x9d

How to Cape a Deer for a Shoulder Mount in Less Than 10 Minutes